Product ID:EPON (R) RESIN 828
MSDS Date:04/06/1989
FSC:8030
NIIN:00-992-3156
MSDS Number: BPVFP

SHELL OIL COMPANY

HOUSTON, TX 77210
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Preparer: J.C. WILLETT

Cage: SHELL

SHELL OIL COMPANY PRODUCT SAFETY AND COMPLIANCE

4320 HOUSTON, TX 77210 US

Telephone: 713-241-2252 /713-241-4819

Cage: SHELL

BISPHENOL A/EPICHLOROHYDRIN BASED EPOXY (THIS PRODUCT IS AN

CAS: 25068-38-6

Fraction By Weight: 100%

*EPICHLOROHYDRIN AND BISPHENOL-A. THESE RAW MATERIALS ARE

RTECS: 9999999ZZ

**ARE CONTROLLED TO 1 PPM, MAX., IN THE PRODUCT.

RTECS: 9999999ZZ

LD50 LC50 Mixture:LD50: ORAL; 11.4 G/KG (RAT)/15.6 G/KG $
Reports of Carcinogenicity:NTP:UNKNOWN IARC:NO
Health Hazards Acute and Chronic:EYE: IRRITATING. SKIN: IRRITATE/SKIN
SENSITIZATION. INGEST: LOW ORDER OF ACUTE ORAL TOXICITY. CONTACT
W/PRODUCT AT ELEVATED TEMPERATURES: EYE: THERMAL BURNS. SKIN:
THERMAL BURNS.
Explanation of Carcinogenicity:N/K $(MOUSE). DERMAL: >20 ML/KG
(RABBIT).
Effects of Overexposure:SKIN SENSITIZATION (ALLERGY): RASHES/HIVES.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN/EYE DISORDERS MAY
BE AGGRAVATED BY EXPOSURE TO PRODUCT. PREEXISTING SKIN/LUNG
ALLERGIES MAY INCREASE CHANCE OF DEVELOPING INCREASED ALLERGY
SYMPTOMS.

First Aid:EYE: FLUSH W/WATER 15 MIN-HOLD LIDS OPEN. MED AID. HEATED
PRODUCT: FLUSH W/COOL WATER 15 MIN. MED AID. SKIN: REMOVE CONTAM
CLOTHES/SHOES-WIPE EXCESS OFF SKIN. FLUSH W/WATER. WASH
W/SOAP/WATER. IF IRRI TATE-MED AID. HEATED PRODUCT: FLUSH W/COOL
WATER 15 MIN. IF CLOTHES STUCK TO BURN-DONT PULL OFF-CUT AROUND.
COVER W/CLEAN MATERIAL. MED AID IMMED. INHALE: MOVE TO FRESH
AIR/PROVIDE OXYGEN IF BREATH

Flash Point Method:PMCC
Flash Point:480F,249C
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:MATERIAL WILL NOT BURN UNLESS PREHEATED. DO
NOT ENTER CONFINED FIRE SPACE W/O FULL BUNKER GEAR (HELMET W/FACE
SHIELD/BUNKER COATS/GLOVES/RUBBER BOOTS)/POSITIVE*
Unusual Fire/Explosion Hazard:*PRESSURE NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS. COOL FIRE EXPOSED CONTAINERS W/WATER.

Handling and Storage Precautions:COOL/DRY PLACE. NO OPEN FLAMES/HIGH
TEMPERATURES. EMPTY CONTAINERS CONTAIN RESIDUES. HANDLE IN
ACCORDANCE W/HAZARD POTENTIAL OF CURING AGENTS USED.
Other Precautions:HEATING RESIN <300F IN PRESENCE OF AIR-SLOW OXIDATIVE
DECOMPOSITION <500F. POLYMERIZATION MAY OCCUR. CURING AGENTS E.G.
ALIPHATIC POLYAMINES CAN PRODUCE EXOTHERMIC REACTIONS IN LARGE
MASSES-CAUSE RUNA WAY POLYMERIZATION/CHARRING OF REACTANTS

Respiratory Protection:NIOSH-APPROVED RESPIRATOR AS REQUIRED TO PREVENT
OVER EXPOSURE. USE ATMOSPHERE-SUPPLY RESPIRATOR/AIR-PURIFYING
RESPIRATOR FOR ORGANIC VAPORS. RECOMENDED PUMPING TEMPERATURE: 180F
MAX.
Work Hygienic Practices:WASH W/SOAP/WATER BEFORE EAT/DRINK/SMOKE/APPLY
COSMETICS/USING TOILET FACILITIES. WASH CONTAM CLOTHES/DISCARD
LEATHER.
Supplemental Safety and Health
FUMES/VAPORS FROM THERMAL/CHEMICAL DECOMPOSITION VARY WIDELY IN
COMPOSITION/TOXICITY. DO NOT BREATHE FUMES. DIFFICULT. GET MED
AID. INGEST: DO NOT INDUCE VOMITING. GET MED AID. NOTE TO DR. IN
GEN ERAL, EMESIS INDUCTION IS UNNECESSARY IN HIGH VISCOSITY, LOW
VOLATILITY PRODUCTS, E.G. NEAT EPOXY RESINS.

Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:.03 @ 77C
Spec Gravity:1.17 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VERY LIGHT YELLOW, VERY VISCOUS LIQUID

Stability Indicator/Materials to Avoid:YES
**PRODUCE HEAT. RUN-A-WAY CURE REACTIONS CHAR/DECOMPOSE RESIN SYSTEM
GENERATING TOXIC FUMES/VAPORS.
Stability Condition to Avoid:REACTS W/STRONG OXIDIZING
AGENTS/LEWIS/MINERAL ACIDS/MINERAL/ORGANIC BASES/ALIPHATIC AMINES.
REACTION W/CURING AGENTS **
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS, ORGANIC
SUBSTANCES, MAY BE FORMED DURING COMBUSTION OR ELEVATED (>500F)
TEMPERATURE DEGRADATION.

Waste Disposal Methods:N/K CLAY/SAND/OTHER MATERIAL/DISPOSE OF
PROPERLY. FLUSH AREA W/WATER-REMOVE TRACE RESIDUE. SMALL: TAKE UP
W/ABSORBENT MATERIAL/DISPOSE OF PROPERLY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.